Test
Privac High-Vacuum Systems 200ml

Wound Drainage – High-vacuum systems PRIVAC®

High-vacuum systems can be used together with Redon drains for post-operative wound drainage. They are available as complete sets, OR systems and ward systems.

  • PRIVAC® 200ml
  • PRIVAC® 400ml
  • PRIVAC® Special variant 400ml
  • PRIVAC® 600ml
Add to wishlist
Category: Tags: ,

Description

Redon bottle

  • Pre-evacuated reservoir with a high initial vacuum of max. 900 mbar
  • With integrated vacuum indicator
  • Available with Large lock or Luer lock connector
  • Easy activation of suction via quick release of slide clamp
  • 200 ml and 400 ml bottles Include an additional safety volume of 50 ml
  • Large and small scales for exact determination of filling quantity
  • Material: PVC

Connecting tube

  • Length = 125 cm
  • Available with Large lock or Luer lock connector for safe connection/ disconnection of bottle and tube
  • Universal connector for attachment of 6-18 Ch. Redon drains
  • With slide clamp

Redon drain

  • Redon drain with trocar (guide needle)
  • Perforations along 150 mm

Use of the Privac System

  1. Insert the drain into the open wound and route it out with the help of the trocar (guide needle) from the surface near the wound, leaving the perforated end in the wound
  2. Remove the trocar using sterile scissors.
  3. Length markings help to place the drain in the correct position. Fix the drain at approx. 3-5 cm from the point where it exits the wound.
  4. Connect the connect- ing tube to the PRIVAC® high-vacuum bottle. Cut the graduated connec- tor to the required drain size and then connect the drain. (The vacuum indicator must be compressed. If it is open, there is no vacuum and the bottle must be replaced.)
  5. Establish the vacuum suction by opening the slide clamp on the green fitting of the bottle.
  6. The drainage fluid now runs into the PRIVAC® high-vacuum bottle.
  7. To change the bottle, close the slide clamp on the connecting tube and detach the tube (there is no more vacuum once the vacuum indicator has opened up). Then connect a new PRIVAC® bottle to the connecting tube (continue with point 5).

HIGH-VACUUM SYSTEMS PRIVAC® 200ml

PRIVAC® 200 ml complete set

  • Redon bottle, connecting tube, Redon drain with trocar (guide needle)

PRIVAC® 200 ml OR system

  • Redon bottle, connecting tube

PRIVAC® 200 ml ward system (replacement bottle)

  • Redon bottle

HIGH-VACUUM SYSTEMS PRIVAC® 400ml

PRIVAC® 400 ml complete set

  • Redon bottle, connecting tube, Redon drain with trocar (guide needle)

PRIVAC® 400 ml OR system

  • Redon bottle, connecting tube

PRIVAC® 400 ml ward system (replacement bottle)

  • Redon bottle

PRIVAC® 400 ml complete set

  • Redon bottle (PVC), connecting tube, Redon drain without trocar (PU)

HIGH-VACUUM SYSTEMS PRIVAC® 600ml

PRIVAC® 600 ml complete set

  • Redon bottle, connecting tube, Redon drain with trocar (guide needle)

PRIVAC® 600 ml OR system

  • Redon bottle, connecting tube

PRIVAC® 600 ml ward system (replacement bottle)

  • Redon bottle